...
When processing the Parts In a Design, it is very useful to be able to assign a PART_TYPE based on information properties extracted for each Part. NetBom provides the user a flexible system to control the PART TYPES and how parts are assigned to a Part Type.
The user has complete control over which parts are identified list of Part Types that can be assigned is virtually unlimited. For instance the user can classify parts as IC, POWER_MODULE, CAPACITOR, INDUCTOR, RESISTOR, CONNECTOR, FUSE, MOSFET or XTAL for instance. , BIPOLAR, TRANSFORMER, FERRITE.
Proper PART_TYPE identification is very important in the Net Tracing algorithm, Power Rail Identification and for many of the individual Design Audit Reports. The Net Tracing Algorithm uses an important CSET called
NetBom provides a configurable PART_TYPE Identification system that uses pattern recognition to determine a known Part Type for the parts extracted from the input designs. Given that rules to identify part-types can vary based on customer designs and need, this system has been expanded to allow for full customization.
...
The Part Type Configuration GUI is started using the Customize Rules/Setting Button on the Main Gui, and then selecting the Part Type Rules Button from the Menu that pops up.
...
This will launch your web-browser with the Configuration GUI (and NetBom will wait for the user to either quit or send back the modified configuration Data
...
The Browser Config Page allow the user to set the Order (or Priority) of the Property used to identify the part Type. For each group, you can add or delete a row to map that property to a named PART TYPE.
A quick video is probably the best way to describe the operation of this interface.
Top Buttons
Apply to Old/New Design Pulldown
Send Configuration To NetBom
Load From File
Save To File
Quit and Close
Demo Video
A quick video is probably the best way to describe the operation of this interface.