...
Supported PIN_REPORT_TYPES and PIN_REPORT file
...
| Info |
|---|
PartBuilder can currently convert Allegro HDL, Orcad, Mentor (ViewDraw) and Zuken CR-5000/CR-8000 input symbols to any of the supported output EDA formats. Unfortunately, Altium does not provide a way to export their symbols to a machine readable ascii file so PartBuilder cannot read an Altium symbol and convert it to the other EDA tools. |
AHDL_SYMBOL_FILES
PIN_REPORT_FILE
...
This setting tells Smart-FRAC the x/y increment that is equivalent to one symbol grid point. Smart-FRAC has a different default setting for each EDA tool and will prompt the user to change this value if needed.
| Note |
|---|
Smart-FRAC may have difficulty converting symbols with pins that are not located on a standard grid |
2. SMART_FRAC_SYM_PIN_SPACING
...
The original symbol properties are discarded and replaced with the customer property contents and locations.
Video Demonstration
PartBuilder:Cadence Capture Orcad Symbol As Input (cadenhance.com)Converting Orcad Symbol To Allegro HDL