The Structure and Syntax of the CadEnhance Symbol Description Language (SDL) is described here

Symbol Description Language Structure

The Symbol Description Language was designed to be efficient, simple to understand and easy to enter.

An SDL File is a collection of ordered SYMBOL_NAME_DEFINITIONs enclosing MATCH_STATEMENTS and Spacer_Commands.

SYMBOL_NAME_DEFINITIONs and MATCH_STATEMENTS and Spacer_Commands can also appear between the start and end of special Loop_Directives

SDL also supports Simple Variable Substitution commands.

SYMBO_NAME_DEFINITION

A SYMBOL_NAME_DEFINITION is used to instruct partBuilder to start organizing pins into a named symbol.

It has 2 parts, a beginning:

SymbolName=

and an end which is just the terminating semicolon.

';'

The SymbolName is the actual name you want to use for the symbol and it should not contain spaces

in the simple sample file, the start of the first SYMBOL_NAME_DEFINITION was

DRAM_ACTL_PINS=

That was followed by several MATCH_STATEMENTS

and was terminated by the

';'

character

It instructed partBuilder to reserve a Symbol named DRAM_ACTL_PINS as a place to add the pins matching the containing MATCH_STATEMENTS that follow.

MATCH_STATEMENTS

MATCH_STATEMENTS are what tell partBuilder which pins to place within the current symbol, what side to place them on and any other modifier to enable creating special graphics or properites for the pins that match.

MATCH_STATEMENTS are built out of LOCATOR, MODIFIER and PIN_MATCH elements

The simplest MATCH_STATEMENT only contains a LOCATOR and a PIN_MATCH, and is entered as

LOCATOR=>PIN_MATCH

The equal-Arrow "=>" separates the PIN_MATCH from the list of LOCATORS and MODIFIERS

MODIFIERS are added on the left hand side of the '=>' either before or after the LOCATOR.

For clarity and easier cut and paste in Excel, our examples will show the LOCATOR first.

MODIFIERS and LOCATORS are separated by the colon character ':' as follows;

LOCATOR:MODIFIER1:MODIFIER2:...MODIFIERn=>PIN_MATCH

There is no restriction on the number of valid MODIFIERS that can be included in a MATCH_STATEMENT.

It should be obvious that only one LOCATOR is used per MATCH_STATEMENT

LOCATORS

Valid Locators are mostly obvious, and are explained in the following table

Locator	Effect
LEFT	place matching pins on the Left Hand Side of the symbol
RIGHT	place matching pins on the Right Hand Side of the symbol
BOTH	distribute the matching pins equally on the Left and Right Hand sides of the symbol
TOP	place matching pins on the top side of the symbol
BOT or BOTTOM	place matching pins on the bottom side of the symbol
AUTO	place matching INPUT pins on the Left Hand Side of the symbol place matching OUTPUT or INOUT pins on the Right Hand Side of the symbol distribute all other pin_types equally on the Left and Right Hand Sides of the symbol

MODIFIERS

Valid Modifiers are explained in the following table. Modifiers may be further broken down by partBuilder to impart extra information as shown

MODIFIER	Effect	Special Notes
DOT or BUBBLE	Instructs PartBuilder to Add an Inversion Bubble in the proper place for any matching pin
CLK or CLOCK	Instructs PartBuilder to Add a clock indicator like '>' in the proper place for any matching pin
SHORT	Instructs PartBuilder to create a SHORT Pin	works for Eagle and Orcad Symbols
ZERO	Instructs PartBuilder ORCAD zero Length Pins
HIDDEN	Instructs partBuilder to create a Hidden Pin.	This currently only works with AllegroHDL and is not reccomended
VECTOR or VECTORED	Instructs PartBuilder to create one symbol pin to represent 2 or more pins.	This currently only works with AllegroHDL and can be used to significantly reduce the size of power symbols
IS_PIN	Instructs PartBuilder that the PIN_MATCH should be applied to the Pin Number instead of the Pin Name	This makes it very easy to create connectors and parts which are built like their physical layout
DPAIR DPAIR_{OPT_SUFFIX}	Instructs PartBuilder to place both the matching diff_pair pin AND its mate pin in sequence	The DPAIR Modifier can be appended with a suffix to impart more information to override the default diff_pair spacing that is configured for partBuilder.
PSG_{swapGroupName}	Instructs PartBuilder that the matching pins are a member of a PIN_SWAP_GROUP. PartBuilder maintains a list of all the PIN_SWAP group names and properly annotates the matching pins so they can be included in the PIN_SWAP in the PCB side.	The name of the pinSwapGroup must be provided in the suffix to the PSG_ modifier. This is supported directly for AllegroHDL

PIN_MATCHES

The PIN_MATCH is the string that PartBuilder uses to test all pins in the extracted pinData for a match.

PIN_MATCHES may be entered as a simple string or with a wildcard.

PartBuilder treats all the PIN_MATCHES it extracts from the SDL as a Regular Expression. It actually converts the wildcard '*' internally to the '.*' used in Regular Expressions.

They may also be entered as a valid Perl Regular Expression.

PartBuilder treats all the PIN_MATCHES it extracts from the SDL as a Regular Expression. It actually converts the wildcard '*' internally to the '.*' used in Regular Expressions.

A Regular Expression is a pattern describing a certain amount of Text. The Regular Expression can be very general or very restrictive.

In the simplest context, PartBuilder uses a regular expressions to determine if a Pin contains the PIN_MATCH pattern.

If the PIN_MATCH is entered as "DQ", PartBuilder will match any pin that Contains DQ anywhere in the pinname.

Excellent references for Regular Expressions exist on the web like the one at this link.

PartBuilder Bus-Enhanced Regular Expressions.

PartBuilder does some behind the scenes work to change the PIN_MATCH Regular Expressions to ensure it is easy to work with Bussed Signals.

Its not truly necessary to understand this detail, but In a normal regular expression, the '[]' characters in the pattern match enclose a list of characters to match against

If you were comparing a list of pins dq7 dq6 dq5 dq4 dq3 dq2 dq1 and dq0 using the regularExpression 'dq[0:7]' , the pattern would only match dq0 and dq7 (and funny enough dq:).

In order to work around this, when PartBuilder sees the 'DQ[0:7]' in a PIN_MATCH it expands it to 8 seperate PIN_MATCHES DQ0, DQ1, DQ2... DQ7 which are then used as pattern matches.

It also maintains the order of the bits so that they will be added to the symbol in LSB→MSB order if you enter busName[0:7] or MSB→LSB order if you enter busName[7:0]

Examples of Useful PIN_MATCH Regular Expressions

PIN_MATCH	Effect	NOTES
DQ	PartBulder will match any pin that contains DQ
DQS	PartBuilder will match any pin that contains DQS
^DQS0	PartBuilder will match any pin that Starts with DQS0	the caret '^' enforces the start of word boundary
^DQ[0:7]	PartBuilder will match any pin that Starts with DQ0 or DQ1... DQ7 L_DQ0 would not match
DQ[0:7]$	PartBuilder will match any pin that Ends with DQ0 or DQ1 ... DQ7 DQ0_L would not match since it doesn't end with 0,1,2,3,,4,5,6,or 7	the dollarSign '$' enforces the end of word boundary
^DQ[0:7]$	PartBuilder will expand to a list of matches ^DQ0$, ^DQ1$, ^DQ2$... ^DQ7$ and will only match DQ0,DQ1,DQ2,DQ3...DQ7... Would not match L_DQ0, DQ00, DQ01 .....	The caret '^' says it must start with the D and the $ says it must end with the digit at the end
IO_.?_35 or IO__35	PartBuilder will match any pin that contains IO_, and _35 it would match: IO__35, IO_A_35, IO1_PIN1_35, IO_THIS_IS_A_LONG_NAME_35 it would not match IO_A_36, IO_A_37 nor would it match IO35 or IO_35 (since we need 2 underscores)	the '.?' (which could also be be entered as '') looks for any number of any of characters partBuilder converts the '' to a '.?' to make it easier to enter wildcards for those not familar with Regular Expressions. The ? is special and neccesary because it makes the match stop if it sees the _35 after it. This particular regular Expression is very powerful when building parts with Pins that have similar names grouped into numeric banks like FPGAs and CPLDS.
IO\d+_\d+	would match: IO0_5, IO7324_8910 Would not match: IO0A_5 because it is not looking for the 'A' or IO_5 because we need a digit after the IO	the \d+ finds 1 or more consecutive digits in a row. if we used IO\d_\d+, it would match IO_5 because \d says find 0 or more consectutive digits.

Symbol Description Language Structure and Syntax