BOM Header Config
- Lexi
Owned by Lexi
BOM Header Config:
The BOM Configuration can be done in this menu, to allow for operations to ignore rows, require columns, and read columns correctly by selecting the proper header.
This menu can be opened by clicking either BOM Configure button in the Select Netlist section in NetBom GUI . It is also opened automatically when running operations on a netlist that has not been configured.
Send Configuration To NetBom:
This will close the edit menu and send all changes back to the CadEnhance NetBom Tool. If it was opened as a result of an operation, the operation will then proceed once it successfully receives the configuration.